PurePro® Aquarium RO/DI Systems

FS301-DI , FS401-DI , FS401P-DI , FS-8000

 

 

PurePro® FS401P-DI 
Aquarium RO/DI system

Removes up 99% of all impurities - including silicates - for clean, clear aquarium

with Deionization (DI)



 

 


Aquarium RO system

Clean, pure water a priority for all . No equipment is effective in helping create water conditions as Osmosis (RO) units. These filter out up to 99% of chemicals found tap water by forcing water through a -membrane that removes 90-99% tap water impurities. result is water that free of minerals and other contaminants.
Our Aquarium RO meet stringent standards and exceeds the quality systems from other manufacturers. wide variety of ranging from economy 3-stage to top of the 5-stage RO/DI units available to suit your needs.  
 

Deionization (DI) filters
De-mineralize filter takes full size RO to higher level of . It is an excellent for reef enthusiasts other serious aquarists, especially who live in areas with exceptionally high levels phosphates in their tap . Our unit includes: pre-filters, carbon pre-filters and TFC (Thin Film Composite) , Deionization (DI) post-filters clear housings. The post takes the small of contaminants that the could not remove filters this to greater 99.99% pure. It will give you 0 ppm , Conductivity attainable less than 0.1/or resistivity of to 18 meg.ohm


Build-in Pressure Gauge
The minimum operating for a RO (reverse ) unit is 50 (pounds per square inch). unit build-in pressure to monitor the operating of the system. If operating pressure is low, an RO pressure pump can be to increase the operating to the ideal range.
 


Why do I need water ?
Tap water often impurities that can cause when added to aquarium. These include phosphate, , chlorine, and various metals. High levels of and nitrate fuel algae growth, and copper, present in tap due to leaching from , is highly toxic to invertebrates. Because RO filters practically all of impurities, they are becoming popular among aquarists, marine hobbyists. (please click here for more )

 

 

Features:

Reverse Osmosis Technologies
Easy to Use Store
Three Color Coded For System Connection.
Include Common Faucet For Easy Installation.
100% Factory Tested Sterilized.
Include Installation Instruction. 
Deionization (DI) Filter. ()
Pressure Gauge (Optional)
Booster Pump For Pressure Needs (Optional)
80GPD, 100GPD, 200GPD (Optional)

 


CARTRIDGE FILTERS
(Stage 1) 5 Micron Filter :
With only five rating. It is effective removing dirt, rust sand particles.
(Stage 2) Granular Carbon Filter:
It takes out 99% of the chlorine and chemicals. It provides reduction of taste, odor, color. Protect and the life of membrane.
(Stage 3) Carbon Filter:
It takes out 99% of the chlorine and chemicals. It provides reduction of taste, odor, color. Protect and the life of membrane.
(Stage 4) Reverse Membrane:
A thin film (TFC) high quality membrane processes 50 gallons day. It remove the hard water contaminants may be present in water: lead, cooper, , chromium, mercury, sodium, cadmium, , nitrite, nitrate, and .
(Stage 5) Deionization () Filter:
Produce 99.99% pure by simply attaching this deionization filter with unit. Convenient post RO DI unit (RO/DI ) provides crucial supplemental filtration remove most impurities pure polished product water. Excellent in areas with water. Produce 99.99% pure . It will give 0 ppm TDS, Conductivity less than 0.1uS/cm resistivity of close to 18 meg.ohm
 

 

Specifications:
Production: 50 GPD / 189 LPD 
Minimum Operation pressure: 10 psi 
Available in : 110 volt, 220volt, 240volt. ( 50 / 60 Hz)
Dimensions: (cm)37 (L) 44 (H) x 21 () - system
Weight: 10 kg -

 


 

PurePro® Aquarium RO/DI Systems

FS301-DI , FS401-DI , FS401P-DI , FS-8000