Installation of Sink - Top Faucet:
Most sinks have an extra hole for the mounting of additional faucets, sprayers or soap dispensers. If your sink does not have an additional hole, use the following procedure.
- Using a VSR drill with a carbide grinding burr, gently grind away enough porcelain or enamel to more than accommodate the drill bit (about the size of a dime). Enough surface material must be removed to expose the base metal.
- Using the 1/4" drill bit, drill a 1/4" hole through the base metal. Operate the drill slowly and carefully, especially when the drill is about to penetrate the metal. If necessary use a drop of two of oil in the hole.
- Repeat step 2. Using the 1/2" drill bit.
Mount the sink top factcet in the hole and using an adjustable
wrench(or hand) to hold the faucet, tighten the 9/16" nut.
*** If it is not availabe to drill a hole, you may use a faucet-bracket
instead. ***
Visit
the User Manuals Archive |
